Reliability Safety Capacity

Accessory & Monitoring

Stick Logger

Stick logger supports GPRS, WIFI, 4G, Ethernet and other communication modes. Its bluetooth function enables local debugging configuration to collect operation and power generation data from inverters.It pairs with solarman professional platform to enable remote PV system monitoring and to realize distributed power station management with lower cost and higher efficiency.

Accessory & Monitoring

Stick Logger

  • External light indicator, logger status at a glance;
  • Plug & play, pick power within inverter, no external power needed, easy to install;
  • Independent from inverter to protect parts inside inverter, eliminate potential problems;
  • IP65 water-proof design, resistant to bad weather, enhance stability;
  • External design, easier to replace faulty equipment;
  • End-user can monitor yields at any time with SOLARMAN APP.

Technical Specifications

  • ProductModel

    LSG-3

    LSG-4

    LSW-3

    LS4G-3

    LSE-B

    Remote Communication Interface

    GPRS

    GPRS

    WiFi

    4G

    LAN

    Working Frequency

    GSM850 / EGSM900
    / DCS1800 / PCS
    1900MHz

    GSM850 / EGSM900
    / DCS1800 / PCS
    1900MHz

    2.142GHz~
    2.484GHz

    704MHZ-960MHZ
    1710MHZ-2690MHZ

    Adaptive Network;
    10M / 100M

    Satellite Positioning

    /

    GPS / Beidou <15m

    /

    /

    /

    Antenna

    External GPRS
    Stick Antenna

    External GPRS
    Stick Antenna

    External WiFi
    Stick Antenna

    External 4G
    Stick Antenna

    /

    Data Interface

    RS485 / RS232 / TTL

    Working Voltage

    DC4.7V~DC15V

    Working Power

    3W

    3W

    1.5W

    5W

    1W

    SIM Card

    Chip Card / MicroSIM

    Chip Card / MicroSIM

    /

    MicroSIM

    /

    Memory

    2M Flash (2M-16M Optional)

    Working Temperature

    -40℃~+85℃

    Working Humidity

    <90% (No Condensing)

    No.of Connections

    One

    Serial Communication Rate

    bps (1200-115200bps Configurable)

    Data Acquisition Interval

    Default 5min (1-15min Configurable)

    User Configuration

    Bluetooth

    APP/Web

    AT+InstructionSet
    Remote Server

    Local Serial Port

    Web

    Firmware Upgrade

    Remote Upgrade

    Others

    Real-time Control, Data resuming